Nuovo Luxury
Torino Copper & Marble Wall Sconce – Cylindrical Marble Wall Light 57cm
Torino Copper & Marble Wall Sconce – Cylindrical Marble Wall Light 57cm
Couldn't load pickup availability
✓ Selected for modern, design-led interiors across Europe
Solid copper meets natural marble in one precise vertical form. The Torino is a surface-mounted wall light with a cylindrical marble shade that glows at a deep 2700K warm white — the kind of light that makes walls, faces and timber look their very best. For a stairwell, bedroom, study or hotel corridor, it brings hotel-standard material quality to a residential setting.
Light doesn't bounce off marble the way it bounces off glass or metal. It passes into the stone, picking up the veining from within, so the shade glows rather than glares. Switched off, it reads as a solid sculptural column on the wall.
Dimming is handled by the included remote control — no wall dimmer to wire in.
TWO MATERIALS, NO SHORTCUTS
Real stone, not a printed or resin imitation. Every shade carries its own veining, so no two fittings are identical — and the pattern only shows its full character once lit.
Solid copper rather than copper-effect plating. It holds its warmth against both cool greys and warm timbers, and deepens subtly with age.
DIMMED BY REMOTE
The Torino dims from the supplied remote control, so you can take it from a full 2700K glow down to a low bedtime level without leaving the bed or the sofa.
Because the dimming happens inside the fitting, you do not need a dimmer switch on the wall. That avoids the flicker and buzz that older wall dimmers often cause with integrated LEDs, and it means your electrician wires it to a standard lighting circuit with nothing special to specify.
WHERE IT WORKS
The 57cm vertical form suits a tall wall, and a pair mounted in sequence up a staircase gives rhythm as well as light.
Mounted either side of a headboard, it frees the bedside table — and with remote dimming you can turn it down without getting up.
Hard-wearing materials and remote-dimmable warm output make it a natural fit for hotel rooms and corridors.
DESIGN SPECIFICATIONS
COMMON QUESTIONS
Can I fit this in a bathroom?
This fitting is not IP rated, so it is intended for dry indoor areas — bedrooms, hallways, stairwells, studies and living rooms. UK wiring regulations require an appropriately IP-rated fitting within the zones around a bath or shower. If you are lighting a bathroom, ask us and we will point you to a rated alternative.
Is the marble real?
Yes — natural stone, not printed resin or a marble-effect film. That is why each shade differs: the veining is whatever that piece of stone happened to contain. Slight variation in colour and pattern between fittings is normal and expected.
How do I dim it?
With the remote control supplied with the fitting. You do not need a dimmer switch on the wall, and you do not need to specify a particular type of dimmer — it wires to a standard lighting circuit and the dimming is handled by the light itself.
Will one remote work two fittings?
Generally yes — a pair mounted either side of a bed will normally respond together to the same remote, which is what most people want. If you would rather control them separately, tell us when you order and we will confirm what is possible.
Is there a bulb to change?
No. The LED is integrated into the fitting and rated for 50,000 hours — upwards of twenty years at three hours a night.
Will the copper change colour over time?
Indoors, very slowly. Copper deepens gently with age rather than turning green — that only happens with prolonged outdoor exposure. Most owners find the tone improves as it settles.
How high should I mount it?
For general wall lighting, roughly 1.5 to 1.7m from floor to the centre of the fitting works well. Beside a bed, lower — around 1.2 to 1.4m — so the light falls where you would read.
DELIVERY
Free UK mainland delivery, fully tracked. Marble is fragile, so each fitting is packed in protective boxing for transit. Installation should be carried out by a qualified electrician in accordance with current wiring regulations.
This fitting is covered by a 3-year warranty.
